Hardness and elastic modulus of microcastings by nanoindentation;
納米壓痕法測定微鑄件硬度及彈性模量
Modified method for the prediction of effective elastic modulus of composite materials;
復合材料等效彈性模量預測方法的改進
Analysis on elastic modulus test of polyaramid fiber yarns;
有機纖維束紗彈性模量測試分析
Influence of modulus of elasticity on the forming precision of lapping tools in the aspherical lapping of bending formation method;
彈性模量對彎曲成形法非球面研磨中磨具成形精度的影響
Study on the modulus of elasticity of composite pad bushed thrust-bearing;
復合材料瓦面推力軸承彈性模量的研究
Simulated annealing-based BP neural network optimization method for back analysis of modulus of elasticity for slope rock mass;
邊坡彈性模量反分析的模擬退火B(yǎng)P網絡方法
Young's modulus and interface fracture toughness of metal-base ceramic coatings;
金屬基陶瓷涂層彈性模量和界面斷裂韌度
The Young's modulus and stress rupture lives of single crystal alloys also exhibit obvious anisotropy.
結果表明,晶體取向?qū)辖鹬ЫM織形態和偏析存在顯著影響,而合金的彈性模量和持久性能也存在明顯的各向異性。
The Young's modulus in different directions of the films were calculated based on phenomenological theory and orientation distribution function (ODF).
計算了薄膜試樣不同方向的彈性模量,研究了織構和甲烷濃度對CVD自支撐金剛石薄膜的宏觀殘余應變的影響。
If seismic method can detect the changing of elasticity modulus in target strata,it will no doubt help us further understand the development of fractures.
當巖石中含有裂縫時,巖石的彈性模量(主要指體模量、剪切模量、泊松比以及地震波的速度)會發生變化,而且這種彈性模量的變化又隨裂縫中是否含有流體而不同。
In this paper, parameters to evaluate the dynamic mechanical property of oil well cement stone are determined to be elasticity modulus aod crashing absorption energy.
確定了水泥石的動態力學性能評價參數為水泥石的彈性模量和水泥石的破碎吸收能。
particle board's elasticity modulus.
針對刨花板、定向刨花板、重組木等碎料板彈性模量的微觀力學求解理論進行綜述，提出各個板種微觀力學模型建立的原則，指出相應的數學模擬計算理論與方法的研究方向，編制計算機仿真計算軟件庫。
The influence of autoclave sterilization on elastic module and flexural strength of five types of posts;
高溫高壓消毒對五種樁撓曲強度與彈性模量的影響
Test-study for the elastic module of concrete with long age under the action of fatigue loads;
疲勞荷載作用下長齡期混凝土彈性模量的試驗研究
The result of analysis shows that the magnitude of in situ stress has the trend to increase with the increasing of the depth and the elastic module of rock mass,but the relation between the in situ stress and elastic module is not so close as the relation between the in situ stress and depth.
結果表明，地應力值隨巖體的埋藏深度和彈性模量的增加而增大，但地應力與巖體彈性模量的關系遠不如它與巖體埋藏深度的關系那樣有良好的線性關系。
Titanium alloy biomaterials have experienced several periods : commercial titanium, traditional TC4(Ti6A14V) alloy, titanium alloys with no aluminum element, titanium alloys with no aluminum and no vanadium element, and low modulus titanium alloys.
它經歷了純鈦、傳統TC4(Ti6Al4V)合金、無鋁鈦合金、無釩無鋁鈦合金,低彈性模量鈦合金等幾個階段。
Ti-Nb alloys have low modulus and good plasticity,and fitting for implanting of body more than others.
通過配制5種成分的Ti Nb合金,研究了Nb對Ti Nb合金彈性模量及力學性能與顯微組織的影響。
Based on a self-consistent three-phase model and Mori-Tanaka theo ry, general expressions are deduced to calculate the effective volume modulus an d the effective shear modulus of a composite containing several sorts of hollow microspherical reinforcements.
基于三相球自洽模型和MoriTanaka方法,首先給出了計算含多相球形空心夾雜復合材料有效體積模量和有效剪切模量的一般公式,然后計算了飛灰空心微珠聚丙烯復合材料的有效彈性模量隨微珠含量及尺寸的變化規律。
apparent modulus of elasticity of rope
鋼絲繩宏觀彈性模量
The equivalent elastic modulus was deduced by comprehensive considering deflection and elastic modulus.
通過綜合考慮撓度引起彈性模量和彈性伸長引起彈性模量推導出等效彈性模量。
Atomistic Simulations of Elastic Moduli in GaN Quantum Dots
GaN量子點彈性模量的分子動力學模擬
Measurement of Young modulus of wood and the Materials Mechanics Performance
木材彈性模量的測量與材料力學性能
Mechanical Properties of Thin Films and Influence of Films Thickness on Elasticity Modulus
薄膜彈性性能和膜厚對其彈性模量的影響
Analysis of Relation of Coefficient of Thermal Expansion and Elastic Modulus;
熱膨脹系數同彈性模量數學模型分析
Analyze the Influence of Elastic Modulus of Posts on Root's Stress Distribution by PSA
樁核彈性模量對牙根應力影響的光彈分析
Influence of Elastic Modulus toValves Designing Parameters of Hydro-Pneumatic Spring
閥片彈性模量對油氣彈簧閥系設計參數的影響
Structural Characteristics of Itz and Prediction of Elastic Modulus of Concrete;
界面結構特性及混凝土彈性模量預測
Experimental Study on Relation between Dynamic Elastic Modulus and Shear Modulus of Soil;
土體動彈性模量與動剪切模量關系對比研究
testing method for elastic modulus of high performance ceramics
工程陶瓷彈性模量試驗方法
Plastics--Determination of compressive elastic modulus
GB/T14694-1993塑料壓縮彈性模量的測定
Method for the determination of the elastic modulus of graphite electrodes
GB/T3074.2-1982石墨電極彈性模量測定方法
Test methods for elastic modulus of high performance ceramics
GB/T10700-1989工程陶瓷彈性模量試驗方法
Test method for modulus of elasticity of thermostat metals
GB/T5986-1986熱雙金屬彈性模量試驗方法
testing methods for elastic modulus of high performance ceramics at elevated temperature
工程陶瓷高溫彈性模量試驗方法
Method for determination of the modulus of elasticity in static bending of wood
GB/T1936.2-1991木材抗彎彈性模量測定方法
Investigation on the Elastic Moduli of SiC_p/6066Al Composites;
SiC_p/6066Al復合材料彈性模量的研究